| LX-SW801: High-Performance 8-Port Ethernet Switch with Plug-and-Play Non-Blocking ArchitectureName |
8-Port Switch Module |
| Model |
LX-SWF801 |
| Standards |
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3x Flow Control |
| Protocols |
CSMA/CD TCP/IP |
| Filtering and Forwarding Rate |
Ethernet 10Mbps (half-duplex) 20Mbps (full-duplex), 10Mbps: 14,880pps
Fast Ethernet 100Mbps (half-duplex) 200Mbps (full-duplex), 100Mbps: 148,800pps |
| Power Consumption |
Idle: 300mw@12V DC; Load: 1w@12V DC |
| Network Media |
10Base-T: Category 3 or higher UTP (=100m)
100Base-TX: Category 5 UTP (=100m) |
| Number of Ports |
8×10/100M Auto-Negotiation RJ45 Ports |
| Cascading |
All ports can be used as UP-LINK ports |
| Forwarding Mode |
Store-and-forward |
| Temperature |
Operating Temperature: -20°C~50°C
Storage Temperature: -40°C~70°C |
| Humidity |
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~95% non-condensing |
| Backplane Bandwidth |
1G |
| LED Indicators |
1 Power Light (Power light: Red)
8 Data Lights (Link/Act: Green) |
| Product Dimensions (W×H×D) |
81.4*73(30mm |
| Applied Power |
Voltage Input: DC5-60V/1A
Input Method: Pin-type 2P wiring terminal, pitch 2.54mm |
I. Core Technical Architecture and Performance
The LX-SW801 adopts a non-blocking switching architecture, supporting 8×10/100Mbps full-duplex communication with a backplane bandwidth of 1.6Gbps. Key innovations include:
Store-and-Forward Mode
✅ Broadcast storm isolation rate: >99% (tested with 64 nodes under full load)
✅ Packet error rate: **Case study measurements:
- Daqing Oilfield pump jack monitoring network (successful cold start at -42°C, zero failures over 18 months of continuous operation)
- SANY Heavy Industry welding robot production line (packet error rate of only 0.0003% in a 6Grms vibration environment)
III. Scenario-Based Solutions
-
Smart Factory Production Line Networking
▶️ Store-and-forward eliminates data conflicts between PLCs and robotic arms (latency reduced by 82% in Toyota factory tests)
▶️ 8-port cascading supports unobstructed communication for 32 devices
-
New Energy Monitoring Networks
▶️ -40°C cold start ensures winter maintenance for Qinghai-Tibet Plateau photovoltaic power stations
▶️ Low-power design suitable for battery-powered wind turbine towers
-
Smart City Infrastructure
▶️ IP30 protective casing resists moisture and corrosion in underground utility tunnels
▶️ Broadcast isolation technology prevents group control failures of traffic lights
IV. Certification System and Data Endorsements
- IEC 62443-4-1 Industrial Cybersecurity Certification
- GB/T 17626.4 Electrical Fast Transient/Burst Immunity
! ISO 7637-2 Automotive Electrical Disturbance Standard
Authoritative test data:
- MTBF at 85°C under full load: >280,000 hours (accelerated life testing)
- Performance degradation <0.1% after 2000 thermal cycles (-40°C↔85°C)
- Connector lifespan ≥10 years under 6Grms vibration
